Up til now I have been successful in getting PacSatGroundStation (PSGS) to work on receive. You can go here if you want to see my setup: http://bx2abt.com/main/Falconsat-3 . I can hit FalconSat-3 with a directory request or file download request and get an immediate response and consequent downloads. Uploading is a different story, however. I have been able to get some messages uploaded, but it was more by chance. Right now if I want to upload I seem to get into a loop where PSGS keeps on sending out the same frame (I presume), then disconnects, after which the whole cycle starts over again.
From the PSGS debugging info you can see that I am successful in logging into PFS3-12. My file gets a designated ID (1f14 in this case) and is ready to be received. Then it uploads what I presume is one frame (you can see this in Direwolf where the same chunk of data is send over and over again) after which possibly the reason why things don't work: "ER_BODY_CHECK received while uploading: /home/hans/PacSatGroundData/FalconSat-3/BX2ABT17.txt.out". The only mention of ER_BODY_CHECK I can find on the internet is that it is sent when the checksum on the file body fails. After that the whole sequence starts again, so the message never gets uploaded and out of the queue.
Does this problem lie with FalconSat-3, Direwolf or PGSG, or somewhere else? Where is the checksum being made? This is my first forray into packet radio/PacSat, so I'm not an expert (yet). I don't want to make any (un)educated guesses, thus any help or hints are appreciated. Cheers,
Hans BX2ABT
This is the output (with debugging turned on) of PSGS:
--------BEGIN------- Open ABCD: Ready to upload file: BX2ABT17.txt.out B: 209908947. U>> DEBUG 3: Open: Adding UP LINK Event: UL_CONNECT PB: Empty.. I>>From:PFS3-12 to BX2ABT Ctrl: 0 Type: I Cmd PF: 0 NR: 0 NS: 0 5 2 cc a7 fb 5c 4> SUCCESSFUL LOGIN to PFS3-12 by BX2ABT DEBUG 3: Open: Adding UP LINK Event: From:PFS3-12 to BX2ABT Ctrl: 0 Type: I Cmd PF: 0 NR: 0 NS: 0 5 2 cc a7 fb 5c 4> SUCCESSFUL LOGIN to PFS3-12 by BX2ABT DEBUG 3: Cmd Ok: Adding UP LINK Event: UL_REQUEST_UPLOAD DEBUG 3: Cmd Ok: UL_CMD: From:BX2ABT to PFS3-12 Ctrl: 0 Type: I Cmd PF: 0 NR: 0 NS: 0 8 3 14 1f 0 0 31 3 0 0 UL CMD: UPLOAD_CMD File: 1f14 Size: 331 S>> I>>From:PFS3-12 to BX2ABT Ctrl: 22 Type: I Cmd PF: 0 NR: 1 NS: 1 8 4 14 1f 0 0 31 3 0 0> Ready to receive file: 1f14 from BX2ABT at off: 817 DEBUG 3: Waiting: Adding UP LINK Event: From:PFS3-12 to BX2ABT Ctrl: 22 Type: I Cmd PF: 0 NR: 1 NS: 1 8 4 14 1f 0 0 31 3 0 0> Ready to receive file: 1f14 from BX2ABT at off: 817 DEBUG 3: Waiting: UL_GO_RESP: From:PFS3-12 to BX2ABT Ctrl: 22 Type: I Cmd PF: 0 NR: 1 NS: 1 8 4 14 1f 0 0 31 3 0 0> Ready to receive file: 1f14 from BX2ABT at off: 817 DEBUG 3: Waiting: GO FILE>From:PFS3-12 to BX2ABT Ctrl: 22 Type: I Cmd PF: 0 NR: 1 NS: 1 8 4 14 1f 0 0 31 3 0 0> Ready to receive file: 1f14 from BX2ABT at off: 817 DEBUG 3: Data: Adding UP LINK Event: UL_DATA_END DEBUG 3: Data: UL_DATA_END: UL_DATA_END S>> I>>From:PFS3-12 to BX2ABT Ctrl: 44 Type: I Cmd PF: 0 NR: 2 NS: 2 1 7 10> UL NAK 16: ER_BODY_CHECK DEBUG 3: Data End: Adding UP LINK Event: From:PFS3-12 to BX2ABT Ctrl: 44 Type: I Cmd PF: 0 NR: 2 NS: 2 1 7 10> UL NAK 16: ER_BODY_CHECK DEBUG 3: Data End: UL_NAK_RESP: From:PFS3-12 to BX2ABT Ctrl: 44 Type: I Cmd PF: 0 NR: 2 NS: 2 1 7 10> UL NAK 16: ER_BODY_CHECK NAK: ER_BODY_CHECK received while uploading: /home/hans/PacSatGroundData/FalconSat-3/BX2ABT17.txt.out
TIME-1: PHT: uptime is 469/13:51:30. Time is Sat Jun 08 12:19:29 2019. U>> DEBUG 3: Idle: Adding UP LINK Event: UL_DISCONNECTED DEBUG 3: Idle: Adding UP LINK Event: Open ABCD: Open ABCD: B: 209908947. PB: Empty.. ---------END-------
This is what Direwolf's output is:
--------BEGIN------- PFS3-1 audio level = 68(+118/-110) [NONE] ||||||||| [0.4] PFS3-1>LSTAT:I P:0x13A8 o:0 l:31473 f:31529, d:1 st:4 e:26<0x0d> Unknown APRS Data Type Indicator "I", Ambulance [0L] BX2ABT>PFS3-12:(SABM cmd, p=1)
PFS3-12 audio level = 69(+115/-111) [NONE] ||||||||| [0.4] PFS3-12>BX2ABT:(UA res, f=0)
PFS3-12 audio level = 70(+119/-110) [NONE] ||||||||| [0.4] PFS3-12>BX2ABT:(I cmd, n(s)=0, n(r)=0, p=0, pid=0xf0)<0x05><0x02>^<0xa8><0xfb><0x04> [0L] BX2ABT>PFS3-12:(I cmd, n(s)=16, n(r)=120, p=0, pid=0x08)<0x08><0x03><0x14><0x1f><0x00><0x00>1<0x03><0x00><0x00>
PFS3-12 audio level = 70(+121/-110) [NONE] ||||||||| [0.4] PFS3-12>BX2ABT:(RR res, n(r)=1, f=0)
PFS3-12 audio level = 70(+121/-109) [NONE] ||||||||| [0.4] PFS3-12>BX2ABT:(I cmd, n(s)=17, n(r)=120, p=0, pid=0x08)<0x04><0x14><0x1f><0x00><0x00><0xfe><0x00><0x00><0x00> [0L] BX2ABT>PFS3-12:(I cmd, n(s)=1, n(r)=2, p=0, pid=0xf0)<0xfe><0x00> the internet server that you sent me a message on April 11, but unfortunately I never was able to download it. It took a while to get the transmitting part working, but now it does and I'm very pleased to be able to contact you via FS-3. Truly an amazin [0L] BX2ABT>PFS3-12:(RR cmd, n(r)=2, p=1)
PFS3-11 audio level = 65(+118/-109) [NONE] ||||||||| [0.4] PFS3-11>PBLIST:PB: Empty.<0x0d> Unknown APRS Data Type Indicator "P", Original Balloon (think Ham b
PFS3-12 audio level = 66(+117/-109) [NONE] ||||||||| [0.4] PFS3-12>BX2ABT:(RR res, n(r)=1, f=1) [0L] BX2ABT>PFS3-12:(I cmd, n(s)=33, n(r)=120, p=0, pid=0x08)<0x08><0x03><0x00><0x00><0x00><0x00>1<0x03><0x00><0x00>
PFS3-12 audio level = 74(+125/-111) [NONE] ||||||||| [0.4] PFS3-12>BX2ABT:(DISC cmd, p=1) [0L] BX2ABT>PFS3-12:(UA res, f=1) --------END-------