The power requirements specified in the 910H manual are 13.8 VDC +/- 15%, which is 15.9 V on the high side. I would not feel comfortable running mine at that level, however. I would suggest putting a couple of 100A diodes in series with the + side of the power lead to drop it down closer to 13.8.... (2 would drop it to about 14.5, which is close to what you might encounter in a car with the engine running)
73 de KA3HSW
----- Original Message ----- From: "Michael Hatzakis Jr MD" lists@hatzakis.net To: amsat-bb@amsat.org Sent: Saturday, January 20, 2007 2:25 PM Subject: [amsat-bb] Voltage Requirements of ICOM IC-910H
I am changing my supply for my ICOM IC-910H because my PS-30 is dying. I have an SGC PS-50 supply that is not regulated, per se, it is a huge supply with massive transformers. It appears to work fine, but I am worried about the fact that is starts at 16v or so.
Specifically, is 15.5 to 16v too high to safely run this radio and is a drop of 1-1.5 volts too much unregulation for proper operation?
Michael K3MH
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb