Hi Allen,
Check and double check the prior.sqf. I use it with success but have run into problems where for example there is a dash number in the Satellite name and the priority number.
So first start with just a couple and not more then nine.
Maybe share you prior.sqf file to see if there is an error in it.
73 Jan PE0SAT
On 15-06-2016 08:33, Allen Burrell wrote:
I have successfully implemented control of my Yaesu G-450/G-550 rotors via ERC using SatPC32. I can now track satellites across the sky as I await arrival of transverters to work with my Flex-3000/1500 combo. I have not been able to get the Auto Sat Change feature to work, however. I have set up prior.SQF with a list of prioritized satellites, and set Auto Sat Change to “A+”. When a satellite becomes available, the lettered box highlights, but no changing of satellite to the active one occurs on the screen. Only after I click on the highlighted letter box does it activate the available satellite, allowing rotor control, and later, I hope, frequency tracking. What am I overlooking? Thanks for any help. Al, KI7RM _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb