Hi, did you also choose Yaesu mode in the controller setup and did you specify COM port and baud rate in the ServerSDX setup window? SatPC32 supports also the Rot2 mode of the AlfaSpid rotors which is supported by all AlfaSpid models. To test it choose item 'AlfaSpid' from the ist of supportd controllers (menu 'Rotor Setup'), click the upper 'Store' button and restart SatPC32. Then specify the COM port in the ServerSpid setup window. The baudrate is fix 600.
73, Erich, DK1TB
Am 15.01.2018 um 18:49 schrieb shakeel saad via AMSAT-BB:
Hi
I have spid ras azimuth elevation rotator. I have set up Satpc32 for yaesu 232 mode to connect with rotator. My Satpc32 is sending azimuth and elevation to comport. But rotator is not moving. Please tell how do I know my rotator is installed correctly. I have setup mode of rotator to ps. But how to confirm or check rotator is installed correctly. The rotator is moving with moving its supplied mouse.
Any help
Shakeel
Get Outlook for Android
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb