Jim,

I used the TS-2000 for F3 quite successfully.

1) F3 is using 9k2 so you have to set TS-2000 Menu 50F to 9600 bauds
2) UZ7HO and Chris PacSatGround works superb for F3, and also worked great for MO-112, just a opportunity to thanks Chris again for his great support for the 1st 3B8 bird.
3) If your TS-2000 on 1k2 bauds it is normal that nothing seen on the waterfall.

Hope above helps.

73


Jean Marc (3B8DU) 



On Dec 7, 2022, at 8:22 PM, Jim McCullers <wa4cwi@bellsouth.net> wrote:

Has anyone on the list used a Kenwood TS-2000 to communicate with FalconSat-3?
If so, can you pass along the menu settings that work?
 
I’m using a borrowed TS-2000 and am still in the learning phase on the menu settings.
 
The audio chain is working with local packet at 1200bps consisting of a DigiRig, using UZ7HO SoundModem and EasyTerm.
For FalconSat-3 the chain is DigiRig – UZ7HO hs-soundmodem – G0KLA PacSatGround.
Based on my  interpretation of the hs_soundmodem waterfall display I’m seeing no data from the TS-2000 when attempting FalconSat-3 communication.
 
I’m certain I have a menu configuration problem and am looking for suggestions.
 
FalconSat-3 does not have long to live, predicted to de-orbit in February and is now active for 24 hours or so on the weekends.
 
Any assistance will be appreciated.
 
Jim McCullers
WA4CWI
 

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA. 
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org