Oscar,
I did a make install and everything worked. Let me know if you run into any issues. Here's a screenshot!
Joseph Armbruster
On Nov 2, 2011, at 8:31 PM, Joseph Armbruster wrote:
Oscar,
After reading the posts today I figured I would go home and take a quick stab at it. Here is what I have done and my results so-far. Total time for these steps was about 10 minutes (and my port upgrade is still running... grrrrrrr...) Anyhow, hopefully this helps! I'm going to step away from the computer for a bit, when I come back later, i'll report back on the result of my final run!
Joseph Armbruster, KJ4JIO
# grabbed gpredict-1.3.tar.gz from sf.net tar -zxvf gpredict-1.3.tar.gz ./configure
# received an error: #checking for XML::Parser... configure: error: XML::Parser perl module is required for intltool
sudo port install intltool #… waited … #ran into a dependency issue with p5.12-xml-parser #Error: Dependency 'p5.12-xml-parser' not found. #Error: Status 1 encountered during processing. #fixed it with: sudo port selfupdate sudo port upgrade intltool sudo port install intltool
#re-ran: ./configure
#received other errors: #configure: error: Package requirements (gtk+-2.0 >= 2.18.0 glib-2.0 >= 2.22.0 gthread-2.0 >= 2.22.0 goocanvas >= 0.15 libcurl >= 7.19.0) were not met: #No package 'goocanvas' found #No package 'libcurl' found
sudo port install goocanvas
#completed without error
sudo port install libcurl
#completed without error
#re-ran: ./configure
#completed without error #SUMMARY: #Gpredict version... : 1.3 #Glib version....... : 2.28.8 #Gio version........ : 2.28.8 #Gthread version.... : 2.28.8 #Gdk version........ : 2.24.7 #Gtk+ version....... : 2.24.7 #GooCanvas version.. : 0.15 #Liburl version..... : 7.22.0
#ran make
#completed without error (took about 30 seconds to build on my 2.53Ghz Macbook Pro)
#tried to run it
cd src ./gpredict
#received this error: #Xlib: extension "RANDR" missing on display "/tmp/launch-gueRnl/org.x:0".
sudo port upgrade outdated
#… this is taking forever right now, because I use ports quite a bit… #… standby for more!
On Nov 1, 2011, at 6:23 PM, Oscar Vera wrote:
Hello,
I have been having problems to compile Gpredict on mac. Is anyone gong to the AMSAT meeting and could provide a little help to compile Gredict?
thank you.
o. _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb