Hi Rico,
So, two questions:
First, what are you planning to use for your radio(s)? I'm a bit puzzled by the need to swap Tx and Rx connections, if you are using a diplexer. And, most of the satellite operations I do involve either two separate radios, or a satellite radio that has separate VHF and UHF antenna connections. In those cases, you'd not need the diplexer at all, since the purpose of a diplexer is to use one feed line to cover two antennas. Could you share your "two diplexers and two switches" diagram?
Second, that's a really cool antenna that you have built. Are the plans available online somewhere?
Greg KO6TH
Rico van Genugten wrote:
Hi all,
I'm slowly assembling my satellite base station setup bit by bit, I have recently mounted an antenna system on my roof consisting of two perpendicular VHF/UHF open-sleeve yagi's mounted at a fixed elevation of 25 degrees on an azimuth rotator, more info here: https://twitter.com/PA3RVG/status/942710621375815680
So I have two feed lines coming into the house, both suitable for VHF and UHF operation. I want to be able to independently select one of the two antennas for RX and TX. This can be realized using two diplexers and two switches, but now for the million dollar question: Which diplexer?
I'm curious to know which diplexers you guys use if you use them, and which can be recommended in terms of insertion loss, VSWR and isolation. If you believe the manufacturer specifications they are all great, but I'm more interested in real life performance or test measurements.
73, Rico PA3RVG _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb