As with everything in life / amateur radio, it depends; aka situational awareness.
Normally on FM birds if there are a lot of other operators on it can be 'bad', doing it over and over makes it worse. On a quiet pass or early in the pass where there are few operators pass it is okay to let others know that you are on.
As previously stated, to maximize success fixate on a single call and try calling them when you think they have finished a QSO. If they do not come back listen and try calling again.
Listening is key to knowing when is a 'good' time to put your RF into the mix. People will be patient of new operators, and old ones at times, if they make a mistake or two.
On Thu, Dec 27, 2018, 19:54 John Brier <johnbrier@gmail.com wrote:
If you mean to just say your callsign and grid without calling someone, yes, that is acceptable.
It might be more productive to call someone who has already done that, but there is nothing inherently wrong with it.
73, John Brier KG4AKV
On Thu, Dec 27, 2018, 19:44 Chris Pohlad-Thomas < chrispohladthomas@gmail.com wrote:
Is it acceptable, when trying to get any QSO on a pass, to call your callsign and your grid?
-- Chris Pohlad-Thomas KC1E _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb