I use an over ear headset but with a fist mic. I use my mobile phone recorder with its regular hands-free earphone and mic. The mic is inserted in one of the owner the ear headset ear cups. It picks up the full duplex and if 1/2 duplex also is sensitive enough to pick up my voice resonating in the earphones.
73 de John, 9H4G
On 19 May 2018, at 16:32, Greene, Stephan A stephan.a.greene@vencore.com wrote:
I think you want a "DJ splitter" cable. Typically a stereo (TRS) plug and two separate MONO output jacks, one for the left and one for the right channel. DJ's use one to monitor a track they are playing on one channel while cueing up a 2nd track in their headphones; the DJ software is configured to output to one track or the other. Use when you have a laptop or tablet with one audio output and don't want to or can't use a mixer or 2nd (USB?) audio device. Usually well-made because DJs hate equipment failures mid-gig. (and we hams hate equipment failures in mid-pass!) I have a Griffin DJ Cable and will have to test this myself. Native Instruments (Traktor) and other DJ equipment vendors sell these. $10-$12 give or take.
The use in this thread is to combine 2 signals into one input jack, while keeping them on separate tracks. Play the recording back in software like Audacity as suggested by others.
I agree the easiest approach is wire a cheap electret mic for local (Uplink) audio. If you tap audio from your uplink radio mic input, you may need to pad down the audio level to the recorder and take steps to isolate the recording line from the radio input.
The other "splitter" cable described connects left and right channels in parallel and is intended . Usually called a headphone audio splitter. You may get a mess unless you wire the plugs from your downlink and local audio to put signals on just one channel. More trouble than it is worth IMO. YMMV.
73 Steve KS1G
-----Original Message----- From: John Brier [mailto:johnbrier@gmail.com] Sent: Friday, May 18, 2018 10:52 PM To: Steve Kristoff Cc: AMSAT BB Subject: Re: [amsat-bb] Recording TX & RX from one or two radios?
Probably because I used the wrong term. It is a breakout cable. Here is what I have. Haven't used it yet, but it should work.
<url removed for berevity>
73, John Brier KG4AKV
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb