Problem solved.
I had to un-install and re-install SatPC32 and NOT restore my data backup. Something got messed up in there.
So I reconfigured everything and now back to normal.
Mike
On 3/31/2018 12:04 PM, Mike Seguin wrote:
I'm working on a weird issue here.
Using SATPC32 vers 12.8d with Win 10 here. Radio is an FT-847.
The program no longer sees a change of the main VFO tuning knob and adjusts my uplink. The uplink up/dwn buttons on the main screen work fine.
My radio is an early model, but the serial # is 8Lxxxx so it has the bi-directional CAT port.
Also, the rig works fine with OmniRig and HDSDR. HDSDR follows the rig main VFO flawlessly.
I had experimented setting the program up to use my FT-736R for 1.2 G as the second radio, but have turned that off. (Radio #2 set to NONE)
I have to be doing something incredibly foolish. Any ideas?
Tnx, Mike