Here I go answering my own questions. I think I found part of my problem. The buttons don't line up in the case very well and caused the rotor to hung up turning in one direction. That was problem number two, I fixed problem number one the bad relay that started all of this.To fix this temporality I have the board out of the case to test and what is now happening is that I still can't turn CCW. All buttons work ok except for the CCW button. I tried a reset thinking that I'm over some set location in the firmware that I cant go CCW, but the reset doesn't work. I replaced all 4 relays. With the rotor completely disconnected I can get a relay click for every rotational control button except CCW, it has to be a glitch in the firmware I can't clear, as I replaced all four relays. And no I really don't want to spend the $900 for the green heron controller. Any other ideas? Thanks for your help...
73 Jeff kb2m
-----Original Message----- From: kb2mjeff@att.net Sent: Saturday, October 20, 2018 3:37 PM To: Amsat Subject: [amsat-bb] AlfaSpid issue
I’m back at my winter home in Florida and decided today, to work on my AlfaSpid rotor control box issue. I replaced two relays to fix the Elevation issue but in testing it before I replaced the other two relays I’m now having a problem with the azimuth that’s been working 100% until this point. When I turn on the rotor control the elevation now seems to work ok, but now the azimuth immediately goes into a clockwise rotation. No matter what I do to the controller, upon startup it starts turning CW, only way to stop is to power it down The azimuth was working fine this morning when a worked a couple of sat passes. Anyone have any ideas? Does anyone know where I can send this to have it fixed? I have no schematic, or even simple instructions on how to reset, etc.
73 Jeff kb2m
--- This email has been checked for viruses by AVG. https://www.avg.com