Nick,
SatPC32 works with the Labjack U12 and the U3 (I have both controllers). Please, read the "Hints[Rotor] for .... Labjack_U3" which can be opened from the SatPC32 menu "?".
It is important to reduce the maximum control voltages for az and el at the control box to 3.3 V (normally 5 - 6 V) because the U3 handles only voltages up to 3.6 V.
I don't know what you mean with "daughter
board". I suppose you mean the necessary buffer interface (piggy
back) which is necessary to protect the U3. I use a homebuildt
interface. There is a foto and a schematic diagram on my
website, Engl. page Downloads, fig. IV 11
and
http://www.dk1tb.de/u3upiggyback.JPG
Charlie and Clint, thank you for also answering Nick's mail.
I thought SatPC32 was written for Windows Vista or Windows 7, 8 or 10 (32- and 64-bit) ...
Your answer may be here:
Sent from my iPhone
On Nov 22, 2021, at 1:59 PM, Nick Pugh <quadpugh@bellsouth.net> wrote:
Will a LabJack model u3-lv with daughter board work with Satpc32?
Nick k5qxj
----------------------------------------------------------- Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/ View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
