What about always correct Doppler on the highest frequency? That is the one affected most by Doppler. 73...bruce
On 6/7/2018 7:42 PM, Kevin M via AMSAT-BB wrote:
Regarding all the explanations on 'how to' adjust doppler... The 2m usually doesn't move enough to need much adjusting, maybe a small bit near LOS. Usually it's just the UHF that needs adjustment, whether it's the uplink or the downlink... So, it's simple if you remember this phrase I came up with:
Adjust UHF UP when it's the UPLINK and DOWN when it's the DOWNLINK because TWO meters is TOO much to bother with.
Hope that helps. 73, Kevin N4UFO _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb