On 13-06-2019 04:08, Hans BX2ABT via AMSAT-BB wrote:
Good morning Hans,
Scott to the rescue! This older version does start up and I'm waiting for some telemetry to come in right now. And it does indeed connect to Direwolf, which is much better than HS_soundmodem in the sense that it doesn't use the soundcard to route audio from GQRX, but UDP instead. Great! Thanks Scott.
Good to hear that you finally got it running. You can also have a look at https://www.pe0sat.vgnet.nl/decoding/unix-tlm-decoding/ for some overview.
@JE9PEL: all OCX files were registered, checked not once, not twice, but thrice. So what I suspected already is that the recent versions of AGW_onlinekiss_plus and getKiss share a similar code base, which is different from the previous AGW_onlinekiss.
Both AGW version will work with the config that I shared.
Now Jan, your instructions on how to install on Linux are very clear, but if they can't be reproduced by an innocent passerby then they are of little use. Have you tried it on a clean install, like Ubuntu 19.04?
And yes I have installed it on multiple systems. Debian testing, uBuntu 16.04 TLS. When you doubt the install, move the Ham specific directories to a temporary location and remove rm -rf ~/.wine and start again with the winetricks step and the rest.
Final request: can someone post or email me an example .kss file from any current sat (like the XW, CAS, etc.) for me to test the decoder?
On this location you can find example .kss files https://www.pe0sat.vgnet.nl/download/
Hans
BX2ABT
73 Jan - PE0SAT