Hi Mike,
It really needs much more information. What do you mean with Sat32 controller? Do you run SatPC32 software? If yes, what the USB/serial or whatever interface box that sits between the PC and the Yaesu Rotor control box. What's the software setup under "Rotor Setup" in the software...... and so on and on....
Stefan, VE4SW
On Fri, Dec 20, 2019 at 4:09 PM WB8PFZ via AMSAT-BB amsat-bb@amsat.org wrote:
I am trying to help out someone with a controller. The control box works manually but does not work with his Sat32 controller. I am not familiar with the software but am trying to diagnose the control box. I am assuming a few volts on the DIN connector that correlate with the relay switching transistor should cycle the relays. If my thinking is correct how many volts would I apply to the DIN pins to prove out the controller is working correctly? Hope this makes some sense. Thanks Mike WB8PFZ _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb