Bob,
I have similar setup. I currently use DXKeeper, part of the DXLabs suite to do my logging. I chose DXKeeper because it works well with LoTW and does an excellent job of reporting.
After some thought I chose not to interface the logging program with the radios or SATpc32. I did not want the headaches of port sharing software. More than than that especially on the FM birds contacts happen so fast real time logging just gets in my way. Rather, I keep a list of contacts as they happen on paper and then log after the fact.
For other uses I have DXKeeper tied to the radio either directly or with Commander (part of the DXLabs suite) or FT8 via JTAlerts but for the satellites the manual method works just fine. Uploading to LoTW (and eQSL if you want), ClubLog and QSL management and reporting is a breeze.
John K4SQC
On Fri, Mar 22, 2019 at 9:30 AM Bob KD7YZ kd7yz@denstarfarm.us wrote:
So I have a K3 which "generally" Rx's on VHF mode (Downlink)
And I have an IC910 which therefore is usually on xmit on the UHF side (Uplink).
And invariably I am using, and quite happy with SatPC32 to control the two radios.
And the latter is done with the help of VSPE to make some virtual serial ports.
So what program(s) can I use to be able to LOG the xmit and the Rx frequencies, the Calls, the locations of the guys ... and also upload/download/match, from LOTW ?
....and as a by product, keep track of Grids Countries and the like?
Contesting of any form is not needed.
thank you
-- 73 Bob KD7YZ AMSAT LM #901
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb