The instructions you seek are at:

http://www.dk1tb.de/IC9700_Setup.pdf

There are also several YouTube videos you can search for.

People with SAT controllers always think that is the answer to every SatPC32 question. But one has nothing to do with the other.

--

Mark D. Johns, KØJM
AMSAT Ambassador & News Service Editor
Brooklyn Park, MN USA   EN35hd

-----------------------------------------------

"Heaven goes by favor; if it went by merit,

   you would stay out and your dog would go in."

    ---Mark Twain

On Mon, Jan 15, 2024 at 1:10 PM Glen Jenkins via AMSAT-BB <amsat-bb@amsat.org> wrote:

Hello Amsat Members,

I am totally new to Amateur Satellite work. I recently purchased and installed AMSAT's SATPC32 and want to use it with my IC-9700. I have a few questions and a request.

1 - On the IC-9700 should the receive (downlink) frequency be displayed on the UPPER portion of the screen and thus should the rig transmit on the displayed frequency that is on the lower portion of the screen (as I see the "TX" symbol there?  On my setup, it appears that SATPC32 is setting the frequencies backwards.  I see the satellite's Downlink frequency on the lower half of the screen with a "TX" next to it.  So this must be incorrect.

2 -On the SATPC32 display should the "Downlink"display the receive frequency from the satellite and MATCH the frequency on SATPC32 in the upper half of the IC-9700 display?  On my setup they do not match today, sometimes they are up to 2 MHz different.  So maybe the communication between the program and the rig are not correct. 

3 - I have been able to hear some stations (ex AO-73) yesterday on the 2m band.I have tried calling them. I assume that I should be able to call them and then simultaneously hear myself,but I NEVER hear myself. So how do I sync this up.  My assumption is that the other station is listening for me on the same frequency so I should hear myself, I understand that the satellite repeater is receiving me on 70cm (uplink).  Is there some procedure to follow in SATPC32 to get synced?

4 - Lastly, can someone please share with me their settings of the IC-9700 to make this all work?

As I am new,I suppose that I'll have a few more questions until I get this all functioning correctly. Thanks to anyone and everyone who answer my questions above.

73s
Glen,WB4KTF, Austin, TX
EM10


-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org