Brian,
Typically the frequencies in the doppler.sqf are center of the passband.
Dave-KB1PVH
Sent from my Galaxy S9
On Sun, Jun 21, 2020, 3:28 PM Brian Wilkins KO4AQF via AMSAT-BB < amsat-bb@amsat.org> wrote:
For setting the uplink and downlink frequencies in doppler.sqf, do I set it to one of the many frequencies starting with the AOS and the software will adjust from there?
For example, using ke0pbr frequency cheat sheet for XW-2F, if I wanted to stay approx center, in Doppler.SQF, I would set the file to 435330.0 for uplink LSB and downlink I would set it to 145990.0
If on another pass I wanted to start somewhere else, I could set it to 435340.0 and 145980.0.
In example 1, the software would adjust from 435330.0 to 435350.0 as the satellite passes over me. (AOS to LOS). -- Brian Wilkins KO4AQF _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb