Thank you for your suggestions I will try them but my main concern was that I was sure that I had the tone set but was still unable to access the bird and wondered if I had not set the tone properly. I have just acquired the ic- 910 I have been using an ic-820H and was not sure if I had set the tone properly. The 820 worked with SatPC32 seamlessly but I had to set the 910 to go to satellite mode so I wasn't sure if I was setting the 910 properly. Or if there was something that I had to do. The 910 works with all other birds fine just not SO50.
Art VE3GNF
On Thu, Apr 16, 2015 at 1:14 PM, Erich Eichmann erich.eichmann@t-online.de wrote:
Hi Art, SO-50 requires a 74.4 Hz sub tone on the uplink signal to be activated and a 67.0 Hz sub tone to be worked. SatPC32 can set both tone frequencies. Click the "T" control (in the uppler left part of the main window) to "T2" to select the 74.4 Hz tone and switch the radio to TX for a few seconds to activate the sat. Then click the control to "T1" to set the 67.0 Hz tone. It the sat is active use only T1. With satellites that don't require a sub tone the functions are disabled. 73s, Erich, DK1TB
Am 16.04.2015 um 16:45 schrieb Arthur Payne:
Tom I am trying to get my lc-910 to work with satPc32 to work SO-50 an ideas I have it tracking (I lengthened the delay) but I don't seem to be able to access the bird.
Art VE3GNF adpayne@sympaticoca _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb