Joe - Historically and traditionally, the minimum standard for VHF QSOes has been:
Both stations send and copy both calls Both stations exchange a meaningful piece of information Both stations acknowledge receipt of the information.
So a minimal QSO would go like this:
KK6MC: CQ KK6MC WB9BSD: WB9SBD KK6MC: WB9SBD, DM65tc KK6MC: roger, EN43XO WB9BSD: roger
At this point the required minimum amount of information has been exchanged, but there is some ambiguity as to whether or not KK6MC has received WB9SBD’s rogers, so it is customary for KK6MC to send 73 to acknowledge the roger. So the typical QSO goes:
KK6MC: CQ KK6MC WB9BSD: WB9SBD KK6MC: WB9SBD, DM65tc KK6MC: roger, EN43XO WB9BSD: roger KK6MC: 73
Nothing says that satellite QSOes have to go this way, but it is a good place to start. Everything is there and if you take something out, it starts to make less sense. I hope that this helps. - Duffey KK6MC
On Oct 2, 2016, at 2:37 PM, Joe nss@mwt.net wrote:
What is the standard for a minimal contact of what must be exchanged for a valid QSO?
Joe WB9SBD
Sig The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
-- KK6MC James Duffey Cedar Crest NM