Missed that somehow this morning. Still must manually enter the frequencies but the displayed Doppler corrected frequencies are big enough. Tried it on a pass of XW-2F, it was manageable as I could leave the antenna alone for a while. Could hear myself without "hunting" for the downlink signal.
Thanks,
Ron
On Sun, 19 Aug 2018 22:57:45 +0200 Koos van den Hout koos@kzdoos.xs4all.nl wrote:
On 08/19/2018 10:42 PM, Ron VE8RT wrote:
First, I need to get the actual Doppler shift info up on a screen as I must enter is manually. Using the Doppler per 100MHz shown on GPredict which a calculator to set the radio works but is far from practical. I'd like to bring up actual Uplink, Downlink Doppler on the screen, but it hasn't been evident how to do that.
GPredict will show these values in the 'radio control' window. Even when there is no radio to control.
Clicking on the little triangle on the top right of the main window will show options like 'radio control' if you had not found that already.
Koos van den Hout PE4KH
-- Koos van den Hout PGP keyid 0x5BA9368BE6F334E4 via keyservers https://idefix.net/ _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb