Despite the documentation, PicSat beacons so far have been 1k2 BPSK.
There is a 1k2 BPSK software modem in:
http://uz7.ho.ua/modem_beta/other-versions.zip
... and the demod on that would be USB. Of course the bandwidth & centering of the audio output is critical for this scheme; what works well for me is to output the audio (I use HDSDR into VB Audio virtual cable) at 4 KHz with the signal centered on the 2000 Hz mark. If you match that 2000 Hz center on the 1k2 BPSK software modem screen, it decodes very nicely.
-Scott, K4KDR
================================
On Wed, Jan 17, 2018 at 11:19 AM, Ken Swaggart k.swaggart@charter.net wrote:
Have been trying to decode the 435.525 MHz beacons from PicSat without success. The modulation is described as "GMSK modulation with G3RUH scrambling". I'm assuming the baud rate is 9600. Normally I use UZ7HO's High-Speed SoundModem for telemetry reception.
Tnx, Ken, W7KKE