Andrew, Being in this end of the hobby for "many" years, I have learned that sometimes the choice comes down to what you can afford. While the TS2000 is a nice radio, with the birdie problem, it leaves a question. Ihave had 2 Icom 910's for many years and even have one of them adapted with the 1.2ghz module. Both have worked flawless and have been more than adequate. The new ICOM 9100 (which you ask about) is a bit pricey for the bands provided. I have been following the production of the 9100 and it has become out of an average hams price range. While the specs are very good, you can achieve the same effect with a TS2000 - Icom 910- Yaesu 847 and even the older icom 820 (?) - Once again, I have always advised sat ops to spend the money on the antennas and coax as this is where you'll find the most advantage for your operation. Good luck and go to the AMSAT website to obtain a truck load of info pertaining to satellite station construction and operating advice. 73, Dee, NB2F NJ AMSAT Coordinator
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Alvaro Gaviria Sent: Monday, May 02, 2011 4:51 PM To: amsat-bb@amsat.org Subject: [amsat-bb] Question about radios
Hello all,
Can someone tell what is better for satellite work, the Kenwood TS-2000X or the Icom IC- 9100 ??
Best regards
Andrew HK4MKE
_________________________
algaviri1@une.net.co
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb