Only slightly off topic - does use for AO-7 Mode A make it close enough?
I'm trying to repair the outer plastic housing of an AEA Isoloop by first gluing it back together and then possibly reinforcing the areas where it broke if necessary.
http://picasaweb.google.com/ve4yz.alan/AEA1030IsoLoop#
The 1/4" black plastic housing has no markings to identify the type of plastic and up to this point has resisted all the glues I have around the house.
ABS cement PVC cement 2 part epoxy Epoxy resin and hardener used for fiberglass Silicon Marine RTV type Contact Cement Glue Gun Crazy Glue is the closest to working but not fully satisfactory
All these glues will flake off the test surfaces I have tried with more or less effort.
Any suggestions on what, if anything, will weld these pieces together?
Thanks and 73, Alan VE4YZ EN19kw AMSAT LM 2352