I have an Icom-7000 and I have set the same CI-V address for both in SatPC32. It works fine on simplex and provides the right doppler for TX as well as RX.
FYI - it should also automatically turn-on the Split mode in the radio to update both VFOs periodically, if not just turn on the Split mode yourself.
I use it for ISS APRS and recently the AISat-1. Hope that helps.
73!Umesh, k6vug
On Wednesday, April 17, 2019, 3:35:13 AM PDT, Dave Webb KB1PVH via AMSAT-BB amsat-bb@amsat.org wrote:
Did you try using SatPC32 ISS instead of the regular SatPC32 for simplex/in band satellites?
Dave-KB1PVH
Sent from my Galaxy S9
On Wed, Apr 17, 2019, 6:03 AM Richard Ferryman via AMSAT-BB < amsat-bb@amsat.org> wrote:
I have an IC-9700 and set up SatPC32 for the IC-9100 as it is the nearest option and simply changed the CI-V address. It seems to work OK on cross band duplex but I don't seem to be able to find a way to handle the simplex satellites. Sometimes I have been able to get the radio to switch to the downlink frequency it does not apply the doppler correction on transmit. Any Ideas?
Dick G4BBH
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb