Hi folks, i owned since 1990 the Rotator G-5400B together with the Trakbox. As I have problem with it and as have renewed my antennas, I decided to change the Also the rotator and have bought the Yaesu G-5500. Today I received and set it up to see if it works perfectly before I install it On the roof. I saw a difference between the old and the new control box, in fact the azimuth display of the old one Shows starting from left to right the following scale:
180 - 225 - 270 - 315 - 0 - 45 - 90 - 135 - 180 360 S W N E S
While the new one shows starting from left to right the following scale:
0 - 90- 180 - 270 - 360 - 90 N E S W N E
Do not know why these difference and sounds so strange to me as I have used For a long time the old one.
Continuing with my settings, I have plugged the cable from the new Control box and the Trakbox and as I have as parking 270°, I saw the azimuth needle going to the left and it stops on About 90° E. The needle seem to be on the right position but not on the right side. At this time I'm a bit confused. Anybody can help me to get out of this confusion? Thanks in advance
73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520
********************************** ******* GSM +39 338 9749786 ******* ****** SMS +39 338 9749786 ****** ***** FAX +39 328 7244294 ***** *** 2nd e-mail: vimone@tin.it *** *********************************