https://www.qsl.net/dk7zb/Cross-Yagi/crossyagi.htm

From: Nico Janssen <[email protected]>
Sent: Monday, November 29, 2021 4:52 AM
To: Brian Clark <[email protected]>; [email protected]
Subject: [AMSAT-BB] Re: Phasing Cable/System - 2 Dual-Band Yagi's

Brian,

The only correct way to do this is using a hybrid ring coupler.
That'll give you 50 Ohms on all ports and you don't lose half of your signals.

73,
Nico PA0DLO

On 29-11-2021 05:22, Brian Clark wrote:

Hello Everyone,

I have two Dual-Band 2 Meter/440 Yagi's  that I would like to use on a Rotator, with one in the vertical polarity and one in horizontal.

Is there a phasing circuit or system that someone can recomend to allow both of these antennas to coexist on one coax input to my radio?

Thanks,

Brian

KF6FES

 
-----------------------------------------------------------
 
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
 
View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/[email protected]
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org