I programmed a bunch of Satellite freqs in with the free Icom programming software a long time ago.    I don’t recall trying a custom offset, but it would be worth a try to check it out and see if it can do what you are looking for.   The software download is at: 

https://www.icomjapan.com/support/firmware_driver/2399/

 

….Dave – N9FN

 

 

 

From: Wayne Estes <w9ae@charter.net>
Sent: Saturday, January 9, 2021 3:51 PM
To: Ant Lefebvre <anthony.lefebvre@gmail.com>
Cc: amsat-bb@amsat.org
Subject: [AMSAT-BB] Re: ISS split in IC-9700 memory

 

On 1/9/2021 12:25 PM, Ant Lefebvre wrote:

Wayne,

 

This video walks you through it. Just tried it on mine and worked like a charm saving to memory. All programmed from the radio face. 

 

That video merely shows how to set up a custom repeater offset in VFO mode. The video doesn't even attempt to show how to save the custom repeater offset to a channel memory.

The instructions on page 25 of the basic manual are the same, showing how to set up a custom offset in VFO mode, but not how to save it in a channel memory.

I'm convinced that it's impossible to store a custom repeater offset in an IC-9700 channel memory.

73,

Wayne Estes W9AE