*Hi all, Thanks to all of you for your help! I am able to get into the ""97" repeater! I also have a TS-480HX *Whitch I will only use on 160 thru 10 Meters, & the TS-2000 for VHF work (IE Pepeaters,Satillite, & CW, & SSB!) 73,.Stu (WA2BSS) *On Sat, Jan 22, 2011 at 8:39 AM, K5OE k5oe@aol.com wrote:
Stu,
*I have received & have set up the Kenwood TS-200 & have a little problem, the initials "TNC" on the digitial display indicatethe the internal "TNC" is on , & was wondering how dow I turn off the Internal "TNC"?
You determine whether you want the TNC "assigned" to the MAIN transceiver or the SUB receiver: menu 46. Then turn on/off packet function: menu 55. You should see the PKT initials in the top right of the display. MAIN is normal.
Also, can listen to the Mt.B eacon "97" repeater, but can't get the offset to work!
Set repeater offset on: menu 43 (no indication on the display). Also, don't forget to set a tone, if needed (TONE button & FUNC+TONE button).
All help greatly apprieated! 73,.Stu (WA2BSS)
In the future this will work by bluetooth and voice command, just like the Ford/Microsoft Sync in my truck and all you will have to do is say to your TS-2020, "97 repeater" and it will know all the other settings :-)
73, Jerry, K5OE ... and to continue the recent bragging: VUCC Satellite #88 WAS Oscar #276 DXCC Satellite #286
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb