Steve,
Could be a few things, with SDR# running is the audio choppy through the speakers? you could lower the sample rate of the SDR also to see if that helps
If the audio isn't choppy then it could be that there are not enough system resources so your getting dropped packets, I have that issue on an old desktop I use for wxsat decoding so I have turned off the main waterfall and spectrum display in SDR# which sorted it for me.
Peter 2M0SQL
On Thu, 28 Jun 2018 at 11:59, skristof@etczone.com wrote:
To get images from NOAA weather satellites I have been using an RTL-SDR with SDR# software and the WxtoImg decoding program. This has worked successfully for a couple of years. I use the VB virtual audio cable to connect SDR# to WxtoImg.
But about a month ago I had to reinstall SDR# as it wasn't working. I think it may have been due to an update in Windows 10. So, SDR# is working fine, but since the reinstall of SDR# I can no longer get viewable images in WxtoImg. The pictures look they have been through the shredder. I tried the slant correction and the resync as described in the Help section, but it didn't fix anything.
It looks like a sync problem, but if the resync doesn't fix it, I'm not sure what to try next.
I know these aren't amateur radio satellites, but I'm hoping there's at least a few of you out there who are downloading weather satellite pictures and can help me out.
All reasonable suggestions would be appreciated. Thank you.
Steve AI9IN _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb