I get the best centered decodes on the SDR at 145.933.200
That holds nicely with the doppler corrections being applied by SDR Console v 3.03
Rx with M2 Eggbeater at 7' and get about 100 frames every decent pass..
I do many unattended passes and get TLM from AO-73 just fine.
73, N0AN Hasan
On Tue, Dec 11, 2018 at 9:35 AM Greg gwalls@pobox.com wrote:
I copied my first telemetry from FunCube 1 back in 2016 and copied it for several months, on and off. Then I got interested in other things and didn't copy it for a while. Now I am back and have an anomaly that I would like to have some advice on.
For the last few months I have not been very successful in copying telemetry. I seem to be getting good signals with a M2 2MCP22 controlled in AZ and EL. I use an Icom IC-910H for the receiver. I could not get dashboard to reliably auto tune. I use HRD Satellite to tune the rig for doppler set to 145.935. If I set the rig to USB, I don't copy anything. So just playing around I tried CW and can hear the data but still not copy. Then I tried adjusting the RIT and I stated copying. I only adjusted the RIT -0.65.
Should I go back to USB and adjust the frequency to find the signal?
Has the satellite changed from 145.935 or is it something here?
Thanks for your input!
73
Greg
W4GHW
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb