Stupid question. Does the CAT have to be enabled on the radio? Including baud rate? Does the serial port show up in device manager? (NO EXCLAMATION POINT)
On Sat, Apr 16, 2016 at 10:27 PM, KD4ZGW kd4zgw@gmail.com wrote:
Ok, I am about to pull my hair out. I have done every thing I know how to get Satpc32 to control my Yaesu FT-736r, but no luck. I have bought a usb cable for the yaesu ft-736, and still no luck. But, however, When I have the RTS+12v and the DTR+12v checked sometimes the “CAT Systems” light on the radio lights up; but the radio locks up, and can’t do nothing with it till I cut it off and back on.
I Bought a rs232 ttl converter, and still no luck. I am now thinking that I didn’t wire the ttl converter right.
Does anyone have a Yaesu FT-736r that is running satpc32 with no problems?
This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb