Clayton,
By "just use BJ1SI-1 as your first repeater" do you set BJ1SI-1 in the packet path?
Rick Tejera (K7TEJ) Saguaro Astronomy Club www.saguaroastro.org Thunderbird Radio Club www.w7tbc.org 623-572-0713 623-203-4121 (cell) SaguaroAstro@cox.net
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Clayton Coleman Sent: Sunday, June 19, 2016 5:28 AM To: AMSAT-BB Subject: [amsat-bb] LilacSat-2 APRS digipeater mode
BG2BHC sent out the following messages on Twitter this morning. I am going to be on as W5PFG-1 via LilacSat-2 on 1230 UTC pass:
LilacSat-2 multi-mode APRS digipeater is ON now. The uplink is on 144.350 and the downlink is on 437.200. @amsat @amsatuk
For the real-time mode, just use BJ1SI-1 as your first repeater. @amsat @amsatuk
For the delayed mode, use BJ1SI-2 and minutes to be delayed in ASCII as your 1st and 2nd repeater. Pad 0 for bytes unused. @amsat @amsatuk
73, Clayton W5PFG _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb