I double checked and as far as I know I don't have either of the symptoms you described. I did run into the object problem under WISP32 and changed it to one number less to prevent the conflict.
When I run the same keps under WISP32 I get the correct readings with the beacon set to 146.520 and -0 Doppler. So it is working correctly under WISP32.
Since it seems to work for you and seeing your display, I'm doing something wrong. So will investigate further. You attachment indicates it should work, so it is something on my end.
The only time there is a frequency limitation that I know of is when you go under CAT and try to make a change. There is a frequency limitation there.
Reid, W4UPD
On 10/21/2016 7:11 AM, Alan wrote:
Dave,
Never ran into a limit on tracking frequency. It is usually an object number conflict, or failing to leave a blank line at the end of the DOPPLER.SQF file. Have done both, and more than once. ;)
73s,
Alan WA4SCA
<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Dave Taylor <Sent: Friday, October 21, 2016 5:57 AM <To: w4upd w4upd@cfl.rr.com <Cc: amsat-bb AMSAT-BB@amsat.org <Subject: Re: [amsat-bb] SatPC32 parking frequency? < <As I recall, SatPC is frequency limited and won?t control a radio above 146.000. There is probably a <limit on UHF also, but I don?t know it. I?ve never investigated to see if this is configurable <somewhere. < <Dave, W8AAS < < <> On Oct 20, 2016, at 11:07 PM, w4upd w4upd@cfl.rr.com wrote: <> <> I have attempted use SatPC to provide frequency parking at the end of any priority passes. Thanks to <Alan, WA4SCA, he provided some data for simulation of a GeoSync satellite. I tweaked the values to <provide what I needed for my locaation and it seems to work fine as far as the satellite always being in <range and that it is selected when no other satellite with a priority of 1-9 is above the horizon. <> <> The problem I am having is that when I put the frequencies I want into DOPPLER.SQF. I entered the <line: <> <> TestSat3,146520,436800,FM,FM,NOR,0,0 <> <> The name matches the keps. etc. However, nothing displays in the Doppler window. My assumption <at this point is that SatPC knows its a Geo or at least there will be no Doppler and doesn't display or use <the entered values. <> <> Wonder if anyone else has any thoughts on this. <> <> The intent was to allow the radio to monitor local frequencies when no satellites were in range then <switch as any came within range. Looks like this is not going to work. <> <> Reid, W4UPD <> <> _______________________________________________ <> Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <> to all interested persons worldwide without requiring membership. Opinions expressed <> are solely those of the author, and do not reflect the official views of AMSAT-NA. <> Not an AMSAT-NA member? Join now to support the amateur satellite program! <> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb < <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions expressed <are solely those of the author, and do not reflect the official views of AMSAT-NA. <Not an AMSAT-NA member? Join now to support the amateur satellite program! <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb