-------- Forwarded Message --------
Hi Rick,
From the menu, try "Satellites" then "Groups" to bring up "Sat
Groups" sub menu. It should default to "Standard".
Then select "Edit" and assuming you have PO-101 in your kep file
(nasa.all) then you should be able to select PO-101 and it should
appear
as the next letter (N).
If you need some screen shots, I can send you some.
73,
Terry Osborne ZL2BAC
On 26/07/2022 8:27 am, Richard Lawn
wrote:
I'm at our
vacation place working with my old FT-847, Arrow antennas
and SatPC32. I added a couple of satellites and for some
reason PO-101 is not highlighted in the bottom list of
active satellites. If I roll over the last letter which is
greyed out (N in my case) it shows PO-101 but is not shown
in bold letters like the others suggesting something ios
wrong. Any suggestions? I've checked that the name in the
various files is the same.
Rick, W2JAZ
-----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org