After some OTA time what I'm finding out is that my setup here works only with FM sats. SO-50, CAS-3H, and NO-84(with the FM d/l). All of the linear birds do not work. What happens with the linear birds is when you first initialize them upon AOS the frequencies change correctly at the start of pass but after that there is no Doppler correction on the 817, or frequency manipulation with SatPC32's Cat tuning drop down box. With the FM birds all of this works correctly. If someone actually has this setup working with the linear birds I would like to see your exact configuration. Either I'm missing something not so obvious, or there is a s/w bug, possibly in HDSDR.
My setup...
FT-817ND SDRplay SatPC32 ver 12.8c HDSDR 2.70
73 Jeff kb2m
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Clayton W5PFG Sent: Sunday, October 04, 2015 16:31 PM To: amsat-bb@amsat.org Subject: Re: [amsat-bb] HDSDR SDRplay 817 issue
Yes, I use VSP with HDSDR to full integrate with SatPC32 successfully.
Make sure radio 2 is set to the proper radio type in SatPC32 for the FT-817. Use radio 1 for the CAT interface to HDSDR. It will appear as a Kenwood TS-2000. You will need to activate CAT in HDSDR for it to work.
I have used this setup many times for a full automated SDR station on the satellites with a FUNcube Dongle Pro + and FT-857D.
73 Clayton W5PFG
On 10/4/2015 13:40, kb2m@arrl.net wrote:
I'm trying to get HDSDR and SatPC32, to play nicely with HDRplay and an FT-817. I have the HDSDR working with SDRplay like Patrick has demonstrated on here and I'm trying to complete the setup for an fully
automated system.
I'm trying to get the setup working to the point that if I change the uplink frequency on the 817 with its physical dial the downlink on HDSDR will follow. I'm about half way there. I'm at the point if I change the downlink frequency in SatPC32 the HDSDR display changes with it, but not the 817's uplink frequency. When I first load SatPC32 the 817's frequency changes to the correct uplink frequency but doesn't update afterwards. I'm using VSP Manager to create the VSP's I think I'm a little confused about how this should all hook together
serially. Anyone have this working 100% ?
73 Jeff kb2m