Erich replied to me when I asked: " Hi, the program centers the map on your locator only with the zoom 1 (Z1) map. The zoom 2 map is always centered on the satellite to avoid that the satellite is outside the program window. In menu 'Options' un-check start option 'zoom 2', and save the change if you want the program to start with the map centered on you QTH. 73s, Erich, DK1TB" I don't think I ever used used anything other than zoom 1 prior... so I didn't even think to check zoom mode after installation. Rob KA2CZU
On Thursday, February 22, 2018, 2:52:15 AM EST, Wayne Estes w9ae@charter.net wrote:
Jim Ki7WJ wrote:
Upgraded to the new ver D SAT32 and working ok. I haave the Observer stored and is correct for my QTH(Reno), however the map does not center on the qth or the U.S.? unless I engage a satellite specifically. Am I missing something in the set up? ThanksJim KI6WJ
Wayne W9AE replies:
Go into the Setup -> Options menu and make sure that "center map on observer" is enabled.
Wayne Estes W9AE Oakland, Oregon, USA, CN83ik _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb