Hi Rich,
I use dire wolf as the software TNC. It shows RX and tx packets in its DOS window nicely. Very helpful.
Easy path is to have only one sound card enabled, and connected to the radio, then start dire wolf and see if you can copy rx packets right in the dire wolf DOS window.
I use a signalink as the sound card interface connected to the 6pin din connector on the back of the 910h or ft817 so that I don't have to sort out a PTT line. It's quite nice, simple, and effective for many digital modes.
Once you get RX working (try 144.39 first) then you can check the dire wolf manual for how to put it in tx to calibrate/ set tx audio level...
I then use UI-view to connect to dire wolf to do the mapping etc. BUT there's other options besides UI-view..
Have Fun, Mike W4UOO
On Sunday, December 28, 2014, Rich/wa4bue richard.siff@verizon.net wrote:
What programs can be used for ISS APRS?
Rich W4BUE _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb