I use MixW and a rigblaster for 1200 baud AFSK and BPSK, and a hardware TNC for 9600 baud.
73, Drew KO4MA
-----Original Message-----
From: Les Rayburn les@highnoonfilm.com Sent: Apr 23, 2013 3:53 PM To: amsat-bb@amsat.org Subject: [amsat-bb] APRS/Packet on IC-910H
I'd also like to add digital capabilities to the IC-910H to allow some digital contacts through ISS, or just to download telemetry on other birds. Never worked packet before, and have only limited experience with APRS.
The IC-910H is equipped with a Signa-Link interface for soundcard modes, and I've worked quite a bit of WSJT FSK and JT65A. I know that there is a software "solution" for APRS using AGWPE but I haven't tried it.
What would be the recommendations of the group for equipping my station for digital operation on the satellites? AGWPE and the soundcard interface or a TNC? If so, what TNC would be recommended?
Did I say "Thanks" yet? Also appreciate the bandwidth on this reflector--I know newbie questions can be annoying. -- 73,
Les Rayburn, N1LF 121 Mayfair Park Maylene, AL 35114 EM63nf
6M VUCC #1712 AMSAT #38965 Grid Bandits #222 Southeastern VHF Society Central States VHF Society Life Member Six Club #2484
Active on 6 Meters thru 1296, 10GHz & Light
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb