Todd, in the upper section of menu "Mode" choose "Doppler Correction at ....Uplink and Downlink". In the lower section of the menu usually choose "Display in Frequency Window ....Doppler Shift". The option "Frequency at Satellite" is very helpful if you want to agree a frequency for a QSO. Then the chosen frequency is valid for both operators. So, they will immediately hear each other regardless of the different Doppler shifts at both locations. 73s, Erich, DK1TB
Am 12.10.2017 um 23:13 schrieb Todd:
Maybe somebody can help me out. I am switching out computers and installed SatPC32 on the other machine. It's been a while since being on the satellites and forgot some operating functions with the SW. When SatPC32 is correcting for doppler does both Uplink/downlink frequencies change on the radio? Or just uplink? I have "At Satellite doppler" enabled. I noticed the only one changing was the uplink. Any help? Thanks, Todd AL7PX _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb