Yes, it is an outboard unit which connects to the parallel printer port, and I do have just the PC board.
George ----- Original Message ----- From: sraas@optonline.net To: George Henry Sent: Friday, January 26, 2007 5:23 PM Subject: Re: [amsat-bb] Re: G5500 / SatPC32 / Rotor control
Well I would be insterested .. matter of fact i am very interested. Let me just confirm that this is an out board unit that needs an enclosure that can be wired for usb hookup to the pc? And that you have the PCB only?
-Steve
----- Original Message ----- From: George Henry Date: Friday, January 26, 2007 1:56 pm Subject: [amsat-bb] Re: G5500 / SatPC32 / Rotor control To: amsat bb
I have built the FOD-Track, and can vouch for its ease of construction and it's functionality. I am currently building the SatTracker688 (recently featured in the AMSAT Journal) interface by Mark Spencer of the ARRL, and it is also fairly easy to build (1 surface-mount IC if you build it for USB instead of RS-232). The FOD-Track will cost about $20 in parts, while the USB version of the SatTracker688 will run closer to $40 (unless you have a well-stocked junk box...)
I had a quantity of FOD-Track boards made, and sold them on rec.radio.amateur.space several years ago. I have 1 left, if you are interested. The schematic, parts layout, and instructions are all available from the AMSAT software page.
73,
George, KA3HSW
----- Original Message ----- From: "Steve Raas" To: Sent: Wednesday, January 24, 2007 8:13 PM Subject: [amsat-bb] G5500 / SatPC32 / Rotor control
Hello everyone,
In interfacing the radio to the PC with sat pc32 it dawned on
me that I
need to have rotor control as well. I think initially I will
manually aim the
antennas, but soon I will want full pc control. I will have a
serial & USB
connection available for this and am looking for a fully
featured
interface that I can build in a kit form or from easily obtainable
parts. What
exactally 'fully featured' is, im unsure of.. but Im sure I'll
want it.
Trying tp keep cost down as well.
Thanks
Steve Raas
N2JDQ
FN20vg
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of
the author.
Not an AMSAT-NA member? Join now to support the amateur
satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-
bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb