Thanks Tom, I have it all made. I may need to do a Rev. 1.2 on it. I have the DE centered. I thought about it and just drilled the holes. It will be easy to change if I don't like to outcome. I'm going to try and get it on an antenna checker this weekend to see how it tunes up and where. Marv N0FJP, EN34jc ----- Original Message ----- From: "Tom Busch" tom@bloomington.com To: amsat-bb@amsat.org Sent: Friday, May 01, 2009 8:19 PM Subject: [amsat-bb] Re: Question about building the "Cheap" Antenna by WA5VJB
I made the element (the long part) in the same plane as the other elements. I figure the short part is the matching section.
TomB WB8WOR
Rich Dailey (gmail) wrote:
At 08:52 PM 4/28/2009, you wrote:
I am working on some a couple of the "Cheap" antennas by WA5VJB, that have been talked about on here. I am building these for Field Day and th use for some moble work on AO-51 & AO-27 after that. My question is this, Is the "J" /DE element centered in line with the others or is just the long side in line?
Hi Marv - See the link below. The element is centered at the point midway between the free end and the most outward part of the bend where the matching length heads back toward the feedpoint.
That's about as complicated as I can put it - hi...
Rich, N8UX
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb