The control box is showing the elevation meter is fully deflected right on the meter (180 degrees) when it's actually 0 degrees and the elevation rotator does not move when Up or Down is pressed. However, I can confirm the control box is putting out about 32v AC to the rotator via pins 4 to 6 and 5 to 6 when Up or Down is depressed.
On Sun, Jan 7, 2024, 4:58 PM [email protected] [email protected] wrote:
What is the control box not doing. They are not that complicated.
On Sunday, January 7, 2024 at 04:54:07 PM EST, Nick via AMSAT-BB < [email protected]> wrote:
Hi all, I have a Kenpro KR-5400A Rotator system (KR-400 Azimuth Rotator, and KR-500 Elevation Rotator) and unfortunately the elevation side of the KR-5400A Control box is not working. I have been looking for a replacement KR-5400A control box with no luck yet but have come across a few KR-5600A Control Boxes for sale; my question for anyone that knows, is the KR-5600 Control box compatible with the KR-5400A Rotator system? To my knowledge the only difference between the KR-5400 and KR-5600 rotator systems is that the azimuth rotator on the KR-5600 is a KR-600X which is a slightly stronger rotator and it has limit switches where as the KR-400 rotator does not have limit switches in the rotator. I know that the Yaesu control boxes will not work with the Kenpro rotators without modification due to the starting caps being in the rotators rather then in the control boxes for the kenpros.
Thanks Nick KE8AKW
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/[email protected] To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org