Nick,
One of the current problems with using SATPC32 is that since the Flex does not support the TS-2000 satellite mode, the uplink and downlink are assigned wrong VFO. This is problem since it tries to transmit on RX2. The SATPC32ISS does work, since it does not use the satellite mode. Until the satellite mode is fully implemented in PowerSDR, you will have little luck driving it with the standard SATPC32. Sorry.
When I was trying to get the 2.0.16 PowerSDR to work, I also encountered some issues with the sound. I could see the signal in the second panadapter, but not hear it clearly. I decided it was not worth pursing at this point, but a few things to check. Under Setup | General | RX2, make certain the mute boxes are not checked. Also, try the latest, released last night, PowerSDR 2.0.19 RC1. It fixes several things about the VU5K. I was able to install it with no problem. It will be interesting to see what the new software and firmware does, but that will have to wait here for a few days. Good luck.
Alan WA4SCA
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Nick Pugh K5QXJ Sent: Saturday, February 19, 2011 9:22 AM To: [email protected] Subject: [amsat-bb] flex & satpc32
I am trying to configure a flex and satpc32. I have satpc32 talking to the flex . I am having trouble hearing the down link when the tx is on the b vfo. Can some one tell me how to preset the flex ?
Thanks
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
_______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb