I’ve had the rotator about two years and use it with antennas in the attic. Everything is working normally except the az meter on the controller no longer registers. The controller runs fine and the az and el motors are moving as they should. Fox Delta displays az and el properly, and matches what SatPC32 is telling it. But no reading on the G5500DC az meter anymore. The el meter remains fine.

I can’t find a schematic for the DC version of the 5500. Anyone else had this problem and cured it?

73,

Ray KN2K 

Sent from the all new AOL app for iOS

-----------------------------------------------------------

Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/

View archives of this mailing list at
https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org
To unsubscribe send an email to amsat-bb-leave(a)amsat.org
Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org