yes, network stays APRS. Path is ARISS
On Mon, Jul 15, 2019 at 7:08 PM Fred Hillhouse via AMSAT-BB < amsat-bb@amsat.org> wrote:
That is good to know!
In the radio there are two settings; Network and Packet Path.
Does the "Network" stay "APRS"? Or should it be set to "ARISS"? I assume the Packet Path becomes "ARISS" or "APRSAT". Correct?
Thank you!
Best regards, Fred N7FMH
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Robert Bruninga via AMSAT-BB Sent: Sunday, July 14, 2019 5:26 PM To: KE6BLR Robert; amsat bb Subject: Re: [amsat-bb] APRS Satellite PATHs
Actually, when you use ARISS or APRSAT then the signal comes down as RS0ISS* if it went via ISS, and comes down as PSAT,ARISS* or PSAT2,ARISS* if it went via one of those. Yes, it is a parsing pain, but a simple rule. If you see ARISS*, then simply find the actual satellite in the previous field.
On Mon, Jul 15, 2019 at 4:31 PM KE6BLR Robert via AMSAT-BB < amsat-bb@amsat.org> wrote:
Just a thought -- one of the benefits of using the actual call sign (RS0ISS, PSAT, PSAT2) rather than ARISS or APRSAT is for the record.
For example, I am calculating the Az/El of each contact based on the digipeated (PSAT*) path. When the digipeated path is ARISS or APRSAT
there
is no good way to clarify which satellite participated in the packet.
http://www.spacecommunicator.club/igates/
See the Az/El columns for PSAT; I plan to add Az/El for others sometime soon.
As a consumer of the data, I prefer seeing the individual call sign. As
the
user of the radio, I can see how using APRSAT for everything is more convenient.
73
On Wed, Jul 10, 2019 at 11:38 AM Ryan Noguchi via AMSAT-BB < amsat-bb@amsat.org> wrote:
Yes, that's correct. FalconSat-3 doesn't digipeat using the generic
ARISS
or APRSAT paths.
Agreed, it's a pain to have to keep changing PATH, baud rate, and data band between FalconSat-3 and the other packet satellites. At least
there
are only two configurations to have to toggle between. Once you've done
it
a couple dozen times, it becomes second nature.
Yes, PSAT2 (and apparently also AISAT) may need to use Narrow FM mode,
but
the mode can be easily programmed into memory channels. I just set up a different set of memory channels for PSAT2 and AISAT to set that mode
and
enable (crude) Doppler correction. I haven't used them yet so don't
know
if
5 kHz steps will cut it.
73, Ryan AI6DO
On Wednesday, July 10, 2019, 10:14:18 AM PDT, Fred Hillhouse viaAMSAT-BB amsat-bb@amsat.org wrote:
Regardless of the other operational requirements of FalconSAT-3, you
are
saying FalconSAT-3 will not digipeat using the generic paths. That
means
the text in the links provided is incorrect. Or is there some other qualifier I have missed?
PSAT2 is also a different beast apparently. The text in the link imply APRS uplinks are narrowband. From the PSAT2 link:
Uplinks: 145.825 MHz narroband [sic] FM packet and 29.4815 MHz SSB
PSK31
User Station Software Configuration: First bullet - Radios must be in Narrowband and track to 1 KHz Doppler
on
the uplink.
The reason for asking is to be able to make as few changes to an HT
(D72)
as possible. And the main use is to achieve a digipeat. When a
satellite
is
the only APRS network available it could be a useful way to get
information
out.
Best regards, Fred N7FMH
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Ryan Noguchi via AMSAT-BB Sent: Wednesday, July 10, 2019 12:11 PM To: amsat-bb@amsat.org Subject: Re: [amsat-bb] APRS Satellite PATHs
FalconSat-3 is a different beast: 9600 bps vs. 1200 bps, and crossband
at
different frequencies than the 1200 bps packet satellites. If you want
to
be digipeated by FalconSat-3, you need to use the PFS3-1 PATH.
73, Ryan AI6DO
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb