If you set Tone ON in SatPC32 it will keep it on in the rig as frequency changes.
On Tue, Sep 3, 2019 at 11:06 Kenneth P Alexander via AMSAT-BB < amsat-bb@amsat.org> wrote:
Thanks Roy,
Sounds promising for the 7100 then!
73,
Ken Alexander, VE3HLS So Phisai, Thailand Blog: bueng-ken.com
On Tue, Sep 3, 2019 at 3:19 PM Roy Dean via AMSAT-BB amsat-bb@amsat.org wrote:
I use a 706MKIIG for my Tx rig, controlled by Gpredict (via Hamlib), and
it
DOES change the Tx frequency during transmit.
The only problem I've seen is that it doesn't seem to maintain Tone settings, so if you need a tone on the uplink, you have to constantly
turn
it on as everytime the frequency updates the tone setting is erased.
--Roy K3RLD
Can SatPC32 (or any other software for that matter) change the transmit frequency on an Icom transceiver while it is transmitting? Yaesu
doesn't
permit this. I'm particularly interested in the Icom IC-7100. Anybody know? Reading through the SatPC32 docs I see that there is a sentence about Yaesu rigs (FT-817, 818, 857, 991 etc) saying it can't
be
done), but no similar statement about Icoms (706, 7000, 7100 etc.)
Thanks
and 73, Ken Alexander So Phisai, Thailand Blog: bueng-ken.com
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb