I have a weird thing happening. On some of the satellites, no matter which way I place the frequencies, VHF,UHF or UHF, VHF the IC-9100 always loads the 2m in the receive and the 70cm in the transmit. Thus, SO-50 will not work as the VHF has to be in the transmit. I change it in the doppler.sqf file, quit out of SATPC32 and restart it. Does not matter. Still loads the same way. I cannot figure this one out. Here is what I have tried on SO-50
Everything worked fine a few weeks ago prior to the radio changing the COM ports when I switched routers (went from COM 11 to COM 3). I have changed the COM port in SATPC32 for the radio. It does place the radio back in the same mode and frequency it was in before starting SATPC32 when you exit the program. This means we are talking to the radio just fine.
Any ideas? Please email me directly so we do not blow up the BB.