That was supposed to read "now" at midnight.... not "not"
-----Original Message----- From: Robert Bruninga [mailto:bruninga@usna.edu] Sent: Monday, January 29, 2007 5:45 PM To: 'Bob Bruninga '; amsat-bb@amsat.org Subject: RE: [amsat-bb] RAFT PSK-31 is enabled
RAFT PSK-31 passes are not beginning to occur around midnight
in
the northern heisphere. Analysis shows RAFT didn't get above
40
C over the weekend when the PSK-31 transponder was on.
Although the 10m receiver noise is hearable in the 145.825 FM downlink, no one has reported hearing a 10m signal yet. So
this
experiment continues until we hear a big gun. Anyone is authorized to bring up the tranponder as noted in the original post below.
The one thing we do know is that RAFT is most reponsive to
being
brought up in the dark. Do not even bother during the day.
Its
command receiver appears to be distorted then and will not
come
up.
Bob WB4APR
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Bob
Bruninga
Sent: Saturday, January 27, 2007 11:25 AM To: amsat-bb@amsat.org Subject: [amsat-bb] RAFT PSK-31 is enabled
RAFT lives!
Throught overnight sleepless efforts, RAFT was finally commanded into PSK-31 mode by the combined efforts of DK3WN, PA3GUO, and PE1ITR and others.
The problem has been that the RAFT command receiver is deaf when the bus voltage is over 8.1 volts. But at night in the dark, it works OK. SO here is how to work RAFT PSK-31. (we have heard no signals yet, and do not know if the HF wire antenna got deployed. So we welcome MAX power on the 28.120 USB PSK-31 uplink. Listen with FM on 145.825 downlink. It is very weak and needs a beam.
Someone in the footprint needs to bring up the PSK-31 transponder with their own TNC command on 145.825 uplink. Just send C RAFT. This connect request packet will activate the PSK-31 transponder for about 90 seconds. You will not get an ACK however.
You may TX on 28.120 USB PSK-31 with max power throughout the pass until we find out if the HF RX is working.
Oh, notice that the "C RAFT" probably will not work in the daytime since the BUS voltage is above 8.1V and so the command receiver is deaf. But you are welcome to try.
Good luck! I am on slow dialup this weekend, so will have little
comment.
Bob, Wb4APR USNA RAFT command station.
---- Original message ----
Date: Sat, 27 Jan 2007 12:56:52 +0100 (CET) From: "Rob Hardenberg" rob@itr-datanet.com Subject: Re: AW: AW: RAFT trials Jan 27 night over Europe >
I was listening on the psk31 downlink the 435UTC pass with the psk decoder but couldn't also detect your signal. The 2m downlink is OK with spinrate qsb between S4 and S9+. Its noisy with computer signals in the waterfall display, but the signal strenght is good for psk demodulation.
I didn't try the 10m uplink yet but if its ok the I will try tomorrow 28/1. I use also a dipole and 100W.
The 6:10UTC pass was not tracked here because of sleep.....
!S 04:35:37 !RAFT>BEACON,SGATE/1
:T#375,081,002,036,036,107,10000000,999
!S 04:36:38 !RAFT>BEACON,SGATE/1
:T#378,081,002,037,036,105,10000000,999
!S 04:36:58 !RAFT>BEACON,SGATE/1
:T#379,081,002,036,035,104,10000000,999
!S 04:37:18 !RAFT>BEACON,SGATE/1
:T#380,081,002,036,035,104,10000000,999
!S 04:37:37 !RAFT>BEACON,SGATE/1
:T#381,080,002,037,036,103,10000000,999
!S 04:37:47 !RAFT>BEACON,SGATE/1 :>RAFT is on 145.825 US
Naval Academy
!S 04:37:58 !RAFT>BEACON,SGATE/1
:T#382,080,002,036,035,103,10000000,999
!S 04:38:17 !RAFT>BEACON,SGATE/1
:T#383,081,002,036,036,102,10000000,999
!S 04:38:37 !RAFT>BEACON,SGATE/1
:T#384,081,002,036,035,101,10000000,999
!S 04:38:57 !RAFT>BEACON,SGATE/1
:T#385,080,002,036,035,101,10000000,999
!S 04:40:47 !RAFT>BEACON,SGATE/1 :>RAFT is on 145.825 US
Naval Academy
73 Rob PE1ITR
Mike Rupprecht schreef:
Hi,
0435UTC pass:
RAFT PSK transponder was ON for 98 seconds. I could not hear my own signal. Worked with (only) 100watts and dipole /vertical R6000 antenna. Downlink is very noisy but we can see the spin rate.
I think we need big guns......
73, Mike
If you connect to RAFT, you will never get an answer from the satellite TNC. So it is important to DISCONNECT
the own TNC.