I’ve heard what Kevin reported. It’s very distinctive. I will pay attention next time but if you asked I would say that the decoder loses sync and misses the next frame or two
B
On Sat, Feb 8, 2020 at 6:51 PM Burns Fisher via AMSAT-BB amsat-bb@amsat.org wrote:
Thanks for reporting this, Kevin. I have not noticed it. Are you able to decode signals from HuskySat with FoxTelem? If so, I wonder where this happens. Do you miss a frame (if you are getting every frame, they should be about every 5 seconds). Are you mainly noticing it by audio (in which case it might be a bunch of zeros in a row). There is one point where I send 1/0/1/0/1/0 which would explain this, but that should only happen when it shifts modes, and I don;t think that has happened.
Any more info would be useful and interesting.
Burns WB1FJ Fox/Husky Software
On Sat, Feb 8, 2020 at 3:20 PM Kevin via AMSAT-BB amsat-bb@amsat.org wrote:
Noticed today that huskysat stops sending data and sends only a carrier for about a second then starts back up, saw it do that 4 times last pass. DAC overflows?
73 Kevin wa7fwf _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb